Crabitat tank journal

This is where you discuss the conditions of your crabitat -- temperature, humidity, substrate, decorating, etc.
Post Reply

Topic author
Scarletfire
Posts: 37
Joined: Sat Apr 27, 2019 10:44 am
Location: ON

Crabitat tank journal

Post by Scarletfire » Mon May 13, 2019 8:36 pm

I don't really see any tank journals, but I guess that's because tanks don't need to be restart / opportunity doesn't arise for crabitats compared to shrimp tanks. Anyway, I'll start my documented journey from not knowing much other than they burrow, to eventually adopting some. Below are what I have right now / planning on getting / planning on doing. Looking for some feedback on things to improve, particularly before I start to actually put stuff into the tat. I'll be sticking the heat tape to the tank today, and insulation if time permits. I live by myself, so hauling the tank to my basement apartment was a struggle already. I may just wait until the weekend to get help to move the tank onto the stand so I don't break the heater insulation that I so carefully chose!

A couple things for recommendations:
- I currently rent, and looking to move in 3-4 years. If there's anything I could do now that will make the transition later easier, I'm all ears.
- I don't know what kind of crabs I'll be adopting, but I've been perusing Kijiji (Canadian Craigslist), and recommending them to HCA


Water
Containers for salt/fresh water with crafting mesh (2" x 5"x x 5"), triple stacked for leaks and easy replace [is this deep enough / big enough? I'm thinking about getting something deeper in case the crabs are actually larger…]
Instant ocean
Seachem prime
[If changing to a larger water container, I may add my hang-on-back breeding boxes to make water changes easier. A little worried about flooding, but I can ensure any tubes are secured to / from the box and water container]

Food
Feeding container: (TBD)
Shrimp spinach tabs (ebita)
Egg shells
Experimental Plant matter: Java moss, guppy grass, Phoenix moss, hornwort
Schedule TBD

Decor
Hiding spots: 3" wide pvc pipe 5" long; small flower pots; pleco cave; DIY coconuts (TBD)
Climbing: 2x cholla wood 5" long; 1x teddy cholla; 2 cholla branches; DIY hamster wheel (TBD); natural fiber twine knitted and netted to make a climbing ladder, hammock, ceiling climbing net to grab on, and moss net
Plants: bromelia (need to quarantine), cat grass (to be started), air plant (need to quarantine)

Shells
Turbo and moon, various sizes (see photos)

Photos:
(1) everything minus the heater, tank and insulation
(2) bromelia and air plants I plan to eventually add to the tank. Currently under grow light next to shrimp tank. I'll move the bromelia into the hydroponics cup later to put into the substrat
(3) knitted twine
(4) assortment of cholla wood. After I got them, I realized how small they were relative to the tank.
(5) "hammock" currently made from DIY net guide
ImageImageImageImageImage

Sent from my ONEPLUS A5010 using Tapatalk

Edit: a few comments about DIY sliding glass top. You want to get glass that's not too snug. There's a gap of 1-2 mm between the glass and corner moulding that makes it impossible to get into the place. I got 4 mm glass; you'll need to widen the moulding so the bottom glass panel will slide better. I used a knitting needle to widen it. PSA: glass is sharp. I'll be smoothing the glass edge after I get heat tape and insulation on.

Lessons learned: get 3mm glass, not 4 mm or it'll be really tight. Wear cut resistant gloves, or carry lots of bandages.

User avatar

curlysister
Posts: 888
Joined: Sun Sep 05, 2010 3:54 pm
Location: Manitoba, Canada

Re: Crabitat tank journal

Post by curlysister » Mon May 13, 2019 10:33 pm

I was going to ask what the glass pieces are - they are part of the lid?

I too got small Cholla wood pieces without realizing how small they were - but that's okay! You can hook them together with plastic zip ties, or just stick them in the sub like a tee-pee for the crabs to climb.

Do you plan to use sand as well as EE for your sub? Many of us find it holds the shape better than just EE alone.
"If there are no dogs in Heaven, then when I die I want to go where they went." -Will Rogers


Topic author
Scarletfire
Posts: 37
Joined: Sat Apr 27, 2019 10:44 am
Location: ON

Re: Crabitat tank journal

Post by Scarletfire » Tue May 14, 2019 12:00 pm


curlysister wrote:I was going to ask what the glass pieces are - they are part of the lid?

I too got small Cholla wood pieces without realizing how small they were - but that's okay! You can hook them together with plastic zip ties, or just stick them in the sub like a tee-pee for the crabs to climb.

Do you plan to use sand as well as EE for your sub? Many of us find it holds the shape better than just EE alone.
The glass will be used for a sliding glass lid.

I like teepee idea. Will definitely that!

I'll be mixing in King Play Sand. I wanted to do a 5:1 ratio, and confirmed that I will use 7 bags of sand in one of my questions on the forum earlier!

Sent from my ONEPLUS A5010 using Tapatalk


User avatar

Oliviet#1
Posts: 552
Joined: Sat Mar 16, 2019 2:07 pm
Location: Central Florida

Re: Crabitat tank journal

Post by Oliviet#1 » Tue May 14, 2019 4:35 pm

if the pvc pipe is for them to hide and climb in you might want to add mesh on the inside (and maybe outside) so they are less likely to slip and slide. Great job researching!
I have had pets in the past, but my family can’t have any furry or feathered ones due to allergies. I usually try my best to help and currently trying to set up a crabitat. I also try to treat others with Love!❤️


Topic author
Scarletfire
Posts: 37
Joined: Sat Apr 27, 2019 10:44 am
Location: ON

Re: Crabitat tank journal

Post by Scarletfire » Wed May 15, 2019 10:00 am

Oliviet#1 wrote:if the pvc pipe is for them to hide and climb in you might want to add mesh on the inside (and maybe outside) so they are less likely to slip and slide. Great job researching!
That's a great idea! I'll try making a net that goes around the pipe to see if it can be tight enough... Probably with some sand papered section s and grooves...

Sent from my ONEPLUS A5010 using Tapatalk



Topic author
Scarletfire
Posts: 37
Joined: Sat Apr 27, 2019 10:44 am
Location: ON

Re: Crabitat tank journal

Post by Scarletfire » Wed May 15, 2019 10:44 am

I finished putting on the heat tape on back and side and insulated it as per motorCrab / Fleabag's guide.

Using THG heat tape instead of ultratherm, the electrical cord sticks out from the side as opposed to the bottom. When you put the side heater on, you'll need to cut a bit of the insulation from the back piece if you want it to still cover the corner.

Next up: Substrate! ImageImage

Sent from my ONEPLUS A5010 using Tapatalk



Topic author
Scarletfire
Posts: 37
Joined: Sat Apr 27, 2019 10:44 am
Location: ON

Re: Crabitat tank journal

Post by Scarletfire » Mon May 20, 2019 9:45 pm

Light is now mounted (T5HO full spectrum) with sliding glass lids. From the mishap posted earlier, I grinded down enough from the side to fit inside the corner moulding by taking away the corners. Still ended up too tight to slide inside the track, but I'll live with it.

7 bags of sand purchased, to be dumped into the tank once I read up on how to moisten eco earth.


ImageImageImage

Sent from my ONEPLUS A5010 using Tapatalk



User avatar

aussieJJDude
Administrator
Administrator
Posts: 3966
Joined: Fri Feb 24, 2012 8:12 pm
Location: Melbourne, Australia

Re: Crabitat tank journal

Post by aussieJJDude » Tue May 21, 2019 6:11 am

Looks awesome. Love the hanging light, almost looks like an aquarium! :)

Sent from my SM-G935F using Tapatalk

Crabs || Fish || Shrimp || Snails || Plants || Insects

25G Nano Freshwater || 64G Freshwater Community || 90G Fancy Goldie Pond || 64G Crabitat
I've never had any problems with 'Impulse Buying'... They're just things I forgot I had planned to get || Self Designated 'HCA Pic Fan' 2012+

Post Reply