Page 1 of 1
How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sat Aug 29, 2020 11:04 pm
by mscrabby
Hi there!
I am new here on the forums, but not new to caring for hermit crabs :)
However, this will be my first time using plastic mesh as climbing surfaces. I am getting a new cage upgrade and it will be way taller than before and I want to utilize this extra space for my crabbies.
I have seen other people use plastic mesh/plastic canvas as ramps, bridges, and climbing backgrounds, so I know that this is doable.
How can I secure plastic mesh sheet(s) to walls of my crabitat?
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sat Aug 29, 2020 11:31 pm
by Hermielover121
I used to use bamboo sticks to hold it up and it worked great (not my idea, I got it from motorcrab). Now I can’t use them because I upgraded there tank to a custom 70 gallon so I can’t use them since my tank is to deep. Now I use a different way I made up. So I have a glass lid on my tank but it is cut into 3 sections so the 2 on the outside are permanently sealed with silicone. What I did was before I put down the silicone I put Bobby pins all around the outside of the tank and siliconed them in, so basically I have little hooks all around the tank to hang any decorations or mesh. I know that it probably won’t work for most people since they don’t have a glass lid that hasn’t been siliconed down, so if it fits then I would just go with the bamboo sticks ( you can get them if amazon or some pet stores ). Hope this helped
Sent from my iPhone using Tapatalk
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sun Aug 30, 2020 8:32 am
by mscrabby
Hermielover121 wrote: ↑Sat Aug 29, 2020 11:31 pm
I used to use bamboo sticks to hold it up and it worked great (not my idea, I got it from motorcrab). Now I can’t use them because I upgraded there tank to a custom 70 gallon so I can’t use them since my tank is to deep. Now I use a different way I made up. So I have a glass lid on my tank but it is cut into 3 sections so the 2 on the outside are permanently sealed with silicone. What I did was before I put down the silicone I put Bobby pins all around the outside of the tank and siliconed them in, so basically I have little hooks all around the tank to hang any decorations or mesh. I know that it probably won’t work for most people since they don’t have a glass lid that hasn’t been siliconed down, so if it fits then I would just go with the bamboo sticks ( you can get them if amazon or some pet stores ). Hope this helped
Sent from my iPhone using Tapatalk
Thank you for the reply! Yeah my new tank will have a solid glass lid so I can’t do it the way you did haha.
My new tank is 18inches so I’ve looked at the bamboo tension rod idea, but I don’t know how to make the spacer that motorcrab did, lol.
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Mon Aug 31, 2020 10:56 am
by Hermielover121
18 inches deep? It matters what your depth is to be able to fit the bamboo rod here’s a photo from my old tank
This was in my 2.5 gallon topper tank but you were just put it on the regular level
Sent from my iPhone using Tapatalk
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Mon Aug 31, 2020 10:00 pm
by Hermies Conrad
I’m new to the forum but not crabbing, same as you! I have been getting a lot of ideas like this from reading here so I recently hung some plastic mesh landscape fencing on the back wall of my existing 29 g. Next time I upgrade I would like to try egg crate like so many crabbers here use and start right from the beginning with a sturdy and versatile wall for climbing and attaching decor. This time I just dug a little sub away and attached the fencing with some command hooks in the top corners and it’s holding up well and I think it works.
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Fri Sep 04, 2020 3:22 am
by Crabbymomma71
Great ideas! I would love to see pics for inspiration!
Sent from my iPhone using Tapatalk
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sat Sep 05, 2020 11:57 pm
by Hermies Conrad
Here is my 29 g with 2 PPs. It’s a tight squeeze in there! Always wishing for a bigger tank but until then I just get creative!
https://www.flickr.com/photos/13563608 ... 775258681/
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sun Sep 06, 2020 6:37 am
by Crabbymomma71
Conrad, WOW! It’s great! And u must be a photographer, awesome pics!!
Sent from my iPhone using Tapatalk
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sun Sep 06, 2020 4:17 pm
by Hermies Conrad
Aww thanks! I’m not a professional photog but I did get my bachelors in photography. All I do with that is just take cool/cute pics of my pets lol. I love seeing others’ crabitat pics.
Re: How Do I Attach Plastic Mesh to Crabitat Walls?
Posted: Sun Sep 06, 2020 11:05 pm
by aussieJJDude
I'd suggest using something rigid like eggcrate and then ziptieing mesh onto that. ^_^
Sent from my SM-G935F using Tapatalk
