Page 1 of 3

Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 11:51 am
by crabitatitude
So as promised I am posting my progress with my waterfall project! I forgot to take pictures of the project until after I had foamed it but you can still get the gist of it.
I used some purple insulation foam I got from home depot for $6 (2x2' and 1" thick). I cut the foam down to the sizes I needed with a serrated kitchen knife I don't use any longer. So as I cut out shapes I filed them in place with a quick dry adhesive. Once the skeleton was to a place I liked I added great stuff to seal any open areas and to add definition.
ImageImageImage
Once the foam dries I will continue to shape it how I want and paint it! More to come!!

Re: Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 4:09 pm
by crabitatitude
Ok, I'm home so time for more photos!
Image
This is the view from the front. A sheet of glass across the front will allow you to see the babies.
Image
This is inside of the fw reservoir, with the gap to allow for water return.
Image
The two falls. I can't wait to see it in motion.
Image
The side that will face the rest of the tat with two ledges and a very small cave near the front.
Image
This is the back
Image
This is where the pump will go.
Image
This is the side that will go next to the wall.

Re: Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 5:05 pm
by YYWW
Verrry cool! You're working fast!


Sent from my iPhone using Tapatalk

Re: Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 5:16 pm
by crabitatitude
Image
After a coat of paint!!
Image
Now I just have to seal the whole thing!

Re: Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 5:24 pm
by singlemomwithcrab
Looks FANTASTIC!

Re: Diy waterfall with viewing area

Posted: Tue Dec 02, 2014 5:27 pm
by crabitatitude
Thanks! I loose attention really quick. So I need to speed through.

Re: Diy waterfall with viewing area

Posted: Wed Dec 03, 2014 2:22 am
by aussieJJDude
Wow looks good! I bet the crabs will love it once finished. I know I will.

(Also, loving that beautiful fish tank in the background. What fish to do you keep?)

Re: Diy waterfall with viewing area

Posted: Wed Dec 03, 2014 9:14 am
by crabitatitude
Thanks! I hope they do! It is a bit more shallow than I wanted. But I think that the climbing areas and the falls that the can crawl around on will make up for it. I haveHarliquin rasboras, pictures cats, and two kuli loaches!

Re: Diy waterfall with viewing area

Posted: Wed Dec 03, 2014 11:34 am
by Ryry
I'm so excited to see it all up and running! It looks amazing so far!

Re: Diy waterfall with viewing area

Posted: Wed Dec 03, 2014 9:24 pm
by crabitatitude
Me too! I did the acrylic sealer tonight. I'm off tomorrow, so I am going to finish the tortoise enclosure and then assemble the hermit falls!

Re: Diy waterfall with viewing area

Posted: Wed Dec 03, 2014 10:18 pm
by aussieJJDude
crabitatitude wrote:Thanks! I hope they do! It is a bit more shallow than I wanted. But I think that the climbing areas and the falls that the can crawl around on will make up for it.
Oh well, I sure they like it anyway, plus you could always get another tank & do it again (then reserve this one for your smaller crabs! :lol: ). But I pretty sure it awesomeness will make up for it! :D
I have Harliquin rasboras, pictures cats, and two kuli loaches!
Do you mean pictus catfish? :?: I never seen a pictures catfish before...
Sounds like an awesome tank, if possible get some more kuhlis! They do awesome & come out a lot more when there's over 4 of them!
Currently I have 5 striped kuhlis & 1 black one, they out all the time! Now all I need to do is the get the black one species buddies & some more striped ones for more cuteness!

Re: Diy waterfall with viewing area

Posted: Thu Dec 04, 2014 10:23 am
by crabitatitude
Haha. Yup. My auto correct got me on that one... I love my kulis they have the cutest little faces! I wanted to get some striped ones but my tank is at a compfortable level.

Re: Diy waterfall with viewing area

Posted: Thu Dec 04, 2014 1:40 pm
by crabitatitude
So after four coats of acrylic sealer and two coats of aquarium sealer applied with a paint brush, I have attached the glass! ImageImage

Re: Diy waterfall with viewing area

Posted: Thu Dec 04, 2014 3:53 pm
by Ryry
Dude this is looking so super awesome!!

Re: Diy waterfall with viewing area

Posted: Thu Dec 04, 2014 9:56 pm
by crabitatitude
Thanks! Tomorrow I add water! Fingers crossed