How to get rid of excess water in substrate?

This is where you discuss the conditions of your crabitat -- temperature, humidity, substrate, decorating, etc.
Post Reply

Topic author
Ellybelly18
Posts: 14
Joined: Fri Jul 07, 2017 9:49 am

How to get rid of excess water in substrate?

Post by Ellybelly18 » Tue Jul 18, 2017 8:46 pm

Hey, so over the years I have had a problem with water. My problem is that whenever I mist the hermits every day and sometimes at night if I feel like it is necessary all the water goes through the Eco Earth and sand mixture to the bottom to the terrarium and creates this muddy, murky, gross puddle of water all along the bottom. I have thought about adding a drainage layer like I do for my FBT's (Fire-Bellied Toads) but then I realized that they would only rip through the garden mesh trying to mold further (as the drainage layer would take up a lot of molting space) and end up in an abyss of clay HydroBalls. I also came with the conflict of if the clay is not safe for hermit crabs or if they would try to eat it and end up with an expanded clay ball in their stomach. I have tried using moss to hold it but every time the moss dries up and shrivels up into little pieces (although that may just be that they like to munch on the moss a lot). So I am thinking of getting a Fogger as it will produce plenty of water vapor to keep the tank humid. I also have problems with humidity and it seems no matter how much I spray it the humidity is always way too low for their liking. About 50 to be exact. I have a lid and everything and it is not in direct sunlight or anywhere near it for that matter so I am just wondering what I can do to solve the drainage problem and the humidity. Respond back soon! Thanks! :)


EPAS
Posts: 54
Joined: Tue Apr 18, 2017 4:24 pm
Location: Tucson, Arizona

Re: How to get rid of excess water in substrate?

Post by EPAS » Wed Jul 19, 2017 3:05 am

Just A Suggestion: I put an egg crate frame on the bottom of mine and zip tied screen andplastic needlepoint canvas over the top.
My brother cut a hole at one corner of the egg crate frame and placed a small piece of PVC pipe inside the frame. The pipe has a 1/2 hole at the bottom so that the water can be drained from the tank.
I'm just setting up my tank, so this has not been tested yet. I purchase something every month for the tat. I hope this gives you some ideas.

User avatar

aussieJJDude
Administrator
Administrator
Posts: 5010
Joined: Fri Feb 24, 2012 8:12 pm
Location: Melbourne, Australia
Contact:

Re: How to get rid of excess water in substrate?

Post by aussieJJDude » Wed Jul 19, 2017 3:17 am

Are you sure the humidity gauge has been calibrated? in a sealed tank, with EE and moss, its virtually impossible not to have high humidity levels, especially with daily misting. However, even though a humidifer will create humidity, over time water will saturate the substrate, so a way to gauge its effect would be wise.
|| Avid Aquarist Addict (2007) || Crazy Crabbing Connoisseur (2012) || Amateur Aroid Admirer (2014) ||

I strive to make HCA a welcoming space for all
Infrequently on due to studies, on a little more on in FB group

User avatar

wodesorel
Tech Support
Tech Support
Posts: 10587
Joined: Thu Oct 01, 2009 8:49 am
Location: Leetonia, Ohio
Contact:

Re: How to get rid of excess water in substrate?

Post by wodesorel » Wed Jul 19, 2017 4:18 am

What he said! ^
Want to see all my crazy pets? @waywardwaifs on Instagram

User avatar

C_fiesta
Posts: 511
Joined: Mon Jun 30, 2014 10:29 am
Location: Minnesota
Contact:

Re: How to get rid of excess water in substrate?

Post by C_fiesta » Fri Jul 28, 2017 10:22 am

With no to little water leaving the tank, be leary of how much water is going into the tank, via humidifier, misting, or other.

Sent from my SM-G930V using Tapatalk
Hey! I'm Christine! I have 5 hermit crabs. Join me on Instagram @christinescrabcare. Also, checkout my Etsy shop www.etsy.com/shop/christinescrabcare

Post Reply