No winning on heat and humidity

[Just_saving_crabs]

Trying to get my temp in the tank above 80 since I have 4 e's in with my jumbos. Humidity seems to stay fairly steady between 70 and 80. Its reading 90 because it was laying on the sand. Crabs knocked it off. I ordered some led lights to put in the tank so hoping that will help solve the issue but I'm gladly open to suggestions right now.

Sent from my SM-N950U using Tapatalk

[Hermiesguardian]

LED lights don't give off heat. What kind of heaters are you using? If you have ultratherms, they can be insulated. You can use reflectix tape over it and around your tank. If you have a different brand heater, you can insulate the tank around the heaters. As insulation you can also use cardboard with tinfoil behind it.

[Just_saving_crabs]

LED lights don't give off heat. What kind of heaters are you using? If you have ultratherms, they can be insulated. You can use reflectix tape over it and around your tank. If you have a different brand heater, you can insulate the tank around the heaters. As insulation you can also use cardboard with tinfoil behind it.

I have the undertherms. So I can put that all over the back of the tank?

Sent from my SM-N950U using Tapatalk

[Hermiesguardian]

LED lights don't give off heat. What kind of heaters are you using? If you have ultratherms, they can be insulated. You can use reflectix tape over it and around your tank. If you have a different brand heater, you can insulate the tank around the heaters. As insulation you can also use cardboard with tinfoil behind it.

I have the undertherms. So I can put that all over the back of the tank?

Sent from my SM-N950U using Tapatalk

Yes, any heater should cover the back of the tank (outside) above the substrate. It can overlap an inch.

[Just_saving_crabs]

LED lights don't give off heat. What kind of heaters are you using? If you have ultratherms, they can be insulated. You can use reflectix tape over it and around your tank. If you have a different brand heater, you can insulate the tank around the heaters. As insulation you can also use cardboard with tinfoil behind it.

I have the undertherms. So I can put that all over the back of the tank?

Sent from my SM-N950U using Tapatalk

Yes, any heater should cover the back of the tank (outside) above the substrate. It can overlap an inch.

I have 2 undertherms on the back now. So I'll try to cover it and see if that helps

Sent from my SM-N950U using Tapatalk

[piratetoothgir]

You can use foam, cardboard, and foil to insulate Ultratherm heaters. Shiny side facing the tank

[Just_saving_crabs]

GETTING THERE!!! All I had was foil and cardboard for now! Thank you

Sent from my SM-N950U using Tapatalk

[Hermiesguardian]

Yay!