Page 1 of 2

Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 10:22 am
by MaryJane
The humidity in my hermit crabs enclosure keeps dropping. I have a 38x18x18 tank. There is plastic wrap on 3/4 of the wire top. Both fresh and salt water pools have a bubbler. I have a humidifier that runs for 30 mins every 1 hour and 30 mins. I also have day and night heat bulbs. I don’t know how to keep the humidity up, anyone know how to help?
Image

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 10:36 am
by MaryJane
Image

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 11:18 am
by HermieBingo
I have humidity problems too, and I have been thinking about getting a moss pit, it might work for you too. Or, you could buy a glass lid. Just some ideas :) .

btw I have a Govee thermometer too, works AMAZINGLY!

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 11:25 am
by MaryJane
HermieBingo wrote:I have humidity problems too, and I have been thinking about getting a moss pit, it might work for you too. Or, you could buy a glass lid. Just some ideas :) .

btw I have a Govee thermometer too, works AMAZINGLY!
Moss pit is a good idea!

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 1:23 pm
by crabs_lex
i used to have problems until i got a glass lid for my 55 gal before that i used a humidifier to keep its up but now i dont need it
is your sub wet enough?

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 1:44 pm
by MaryJane
crabs_lex wrote:i used to have problems until i got a glass lid for my 55 gal before that i used a humidifier to keep its up but now i dont need it
is your sub wet enough?
Did you buy a glass lid or did you make one? I have an exo terra tank so normal lids wouldn’t work.

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 1:49 pm
by crabs_lex
MaryJane wrote:
Mon Mar 22, 2021 1:44 pm
Did you buy a glass lid or did you make one? I have an exo terra tank so normal lids wouldn’t work.
oh i have a regular aquarium tank but i made my own for my 55 and bought one for my 20

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 1:55 pm
by MaryJane
crabs_lex wrote: oh i have a regular aquarium tank but i made my own for my 55 and bought one for my 20
How did you make one? Custom glass exo terra lids are very expensive to buy and I don’t have that much money to spend on a lid.

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:07 pm
by crabbycasey
Moss pit could def help, but I also noticed you said you have 3/4 of top covered with plastic wrap and have a heat lamp...I’m assuming that’s why you have 1/4 left open. Having that open part and a heat lamp could easily be the reason you’re losing humidity. Maybe consider fully wrapping it in plastic wrap and invest in an ultratherm heating pad that you stick to the back of your tank instead of the lamp. I suggest this bc I started out like you and had a hard time with humidity, but this fixed my problem! Good luck!


Sent from my iPhone using Tapatalk

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:10 pm
by MaryJane
crabbycasey wrote:Moss pit could def help, but I also noticed you said you have 3/4 of top covered with plastic wrap and have a heat lamp...I’m assuming that’s why you have 1/4 left open. Having that open part and a heat lamp could easily be the reason you’re losing humidity. Maybe consider fully wrapping it in plastic wrap and invest in an ultratherm heating pad that you stick to the back of your tank instead of the lamp. I suggest this bc I started out like you and had a hard time with humidity, but this fixed my problem! Good luck! Image


Sent from my iPhone using Tapatalk
I do have a heat mat on the side of my tank, but that alone doesn’t keep it warm enough. My hermit crabs are in the corner of my room so without a light is gets dark because my window doesn’t get much sun. The heat lights are 100w I believe.

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:14 pm
by crabs_lex
crabbycasey wrote:
Mon Mar 22, 2021 2:07 pm
Moss pit could def help, but I also noticed you said you have 3/4 of top covered with plastic wrap and have a heat lamp...I’m assuming that’s why you have 1/4 left open. Having that open part and a heat lamp could easily be the reason you’re losing humidity. Maybe consider fully wrapping it in plastic wrap and invest in an ultratherm heating pad that you stick to the back of your tank instead of the lamp. I suggest this bc I started out like you and had a hard time with humidity, but this fixed my problem! Good luck! Image


Sent from my iPhone using Tapatalk

Didn’t notice they said that good thing u pointed that out CC
but heat lamps will definitely drain humidity UTH are usually a better option for that reason and especially having the keep part of the tank uncovered to use a heat lamp will drain humidity
MaryJane wrote:
Mon Mar 22, 2021 1:55 pm
How did you make one? Custom glass exo terra lids are very expensive to buy and I don’t have that much money to spend on a lid.
i ordered custom cut plexiglass from my local glass cutter
i got four pieces (bc my tank has a cent brace) and taped two sets of two pieces together to make two pieces and then you can just lay them on top and flip them open

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:15 pm
by crabbycasey
Yea, I had to also get a lighting strip for their day/night cycle when I made the change, but it’s for light only, no heat. I too had a heating pad on the back when I was using lamp, but it wasn’t a good one and was too small to generate enough heat.

They say to get one as big as the back of the tank above the sub line. I did that with 2 of the 35x6 heat strips from BeanFarm. I have a 40g breeder (36x18x18) and also have one on the side of my tank so they have a warm corner. Unsure of the size and brand you have, but if it’s worth it to you, you could always add more heat pads that way. Just some ideas! I hope you get it all figured out!


Sent from my iPhone using Tapatalk

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:18 pm
by MaryJane
i ordered custom cut plexiglass from my local glass cutter
i got four pieces (bc my tank has a cent brace) and taped two sets of two pieces together to make two pieces and then you can just lay them on top and flip them open[/quote]

I’ll look into converting my screen into glass, thanks!

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:20 pm
by MaryJane
crabbycasey wrote:Yea, I had to also get a lighting strip for their day/night cycle when I made the change, but it’s for light only, no heat. I too had a heating pad on the back when I was using lamp, but it wasn’t a good one and was too small to generate enough heat.

They say to get one as big as the back of the tank above the sub line. I did that with 2 of the 35x6 heat strips from BeanFarm. I have a 40g breeder (36x18x18) and also have one on the side of my tank so they have a warm corner. Unsure of the size and brand you have, but if it’s worth it to you, you could always add more heat pads that way. Just some ideas! I hope you get it all figured out!


Sent from my iPhone using Tapatalk
Thanks for the info!

Re: Humidity Keeps Dropping

Posted: Mon Mar 22, 2021 2:25 pm
by MaryJane
crabbycasey wrote:Yea, I had to also get a lighting strip for their day/night cycle when I made the change, but it’s for light only, no heat. I too had a heating pad on the back when I was using lamp, but it wasn’t a good one and was too small to generate enough heat.

They say to get one as big as the back of the tank above the sub line. I did that with 2 of the 35x6 heat strips from BeanFarm. I have a 40g breeder (36x18x18) and also have one on the side of my tank so they have a warm corner. Unsure of the size and brand you have, but if it’s worth it to you, you could always add more heat pads that way. Just some ideas! I hope you get it all figured out!


Sent from my iPhone using Tapatalk
Do you know type/brand of lighting you use?