best glue?
best glue?
i’m getting two new glass lids for my tank but my center brace on it is broken
so i am looking for the best way to fix it because i don’t want to have any unnecessary fumes in the crab tank
so i am looking for the best way to fix it because i don’t want to have any unnecessary fumes in the crab tank
-
- Posts: 3308
- Joined: Sun Aug 04, 2019 11:30 pm
- Location: PA
- Contact:
Re: best glue?
I'm wondering if using silicone safe for fish aquariums would work. Just a thought. 
Sent from my Moto G (5) Plus using Tapatalk

Sent from my Moto G (5) Plus using Tapatalk
"Hunting is not a sport. In a sport, both sides should know they're in the game." -Paul Rodriguez-
https://www.etsy.com/shop/BigBeausBouti ... form-mcnav
https://www.etsy.com/shop/BigBeausBouti ... form-mcnav
Re: best glue?
Yes, aquarium safe silicone is perfect to use. I use it a lot. But, make sure you use it on an empty tank, let it dry for a few days. The fumes are harmful to crabbies.
Sent from my Pixel 3 using Tapatalk
Sent from my Pixel 3 using Tapatalk
6 babies, 4 Es and 15 PPs.
-
- Posts: 3308
- Joined: Sun Aug 04, 2019 11:30 pm
- Location: PA
- Contact:
Re: best glue?
I think her 55 gal is full of crabbies.Xenocrab wrote:Yes, aquarium safe silicone is perfect to use. I use it a lot. But, make sure you use it on an empty tank, let it dry for a few days. The fumes are harmful to crabbies.
Sent from my Pixel 3 using Tapatalk

Sent from my Moto G (5) Plus using Tapatalk
"Hunting is not a sport. In a sport, both sides should know they're in the game." -Paul Rodriguez-
https://www.etsy.com/shop/BigBeausBouti ... form-mcnav
https://www.etsy.com/shop/BigBeausBouti ... form-mcnav
Re: best glue?
yeah it is...
is there an alternative?
is there an alternative?
Re: best glue?
Do you have another tank that they could temporarily live in for 5-7 days til the silicone dries? If they are all up of course, never dig up crabbies.
Sent from my Pixel 3 using Tapatalk
Sent from my Pixel 3 using Tapatalk
6 babies, 4 Es and 15 PPs.
Re: best glue?
not big enough no :/
plus i have a few under
also what if i tried like an all natural glue or something homemade? i’m not a handy person by any means so i wouldn’t know lol!
plus i have a few under
also what if i tried like an all natural glue or something homemade? i’m not a handy person by any means so i wouldn’t know lol!

Re: best glue?
Can you wrap popsicle sticks on the top and bottom of the crack/break with jute twine or hemp string? Like board supports wrapped in string?
Or thin cardboard wrapped with jute or hemp instead of popsicle sticks?
Sent from my Pixel 3 using Tapatalk
Or thin cardboard wrapped with jute or hemp instead of popsicle sticks?
Sent from my Pixel 3 using Tapatalk
6 babies, 4 Es and 15 PPs.
-
- Posts: 2378
- Joined: Tue Aug 08, 2017 9:56 pm
- Location: Coal Region in Pennsylvania
- Contact:
Re: best glue?
How bad is the brace broken?
When I used you ride dirt bikes and would snap a fender off or split it I would use zip ties to fix it! Basically drill a hole on each side of the crack and zip tie it together! Add several zip ties in a row to use them like stitches! For additional strength use some type of plastic as a splint! When you are drilling be sure you have a good bit, and lay something in the tank, like a towel to catch any plastic shavings!
I always thought the zip tie stitches looked cool if done neatly! It's amazing what you can actually do with them!
When I used you ride dirt bikes and would snap a fender off or split it I would use zip ties to fix it! Basically drill a hole on each side of the crack and zip tie it together! Add several zip ties in a row to use them like stitches! For additional strength use some type of plastic as a splint! When you are drilling be sure you have a good bit, and lay something in the tank, like a towel to catch any plastic shavings!
I always thought the zip tie stitches looked cool if done neatly! It's amazing what you can actually do with them!
Coenobita Curiosities offering crabby decor
https://www.etsy.com/shop/CoenobitaCuriosities
https://www.etsy.com/shop/CoenobitaCuriosities
Re: best glue?
its a bit on the badder side but there are two points that stick out and that that just might work!!!Motörcrab wrote: ↑Fri Jan 22, 2021 9:27 pmHow bad is the brace broken?
When I used you ride dirt bikes and would snap a fender off or split it I would use zip ties to fix it! Basically drill a hole on each side of the crack and zip tie it together! Add several zip ties in a row to use them like stitches! For additional strength use some type of plastic as a splint! When you are drilling be sure you have a good bit, and lay something in the tank, like a towel to catch any plastic shavings!
I always thought the zip tie stitches looked cool if done neatly! It's amazing what you can actually do with them!
Re: best glue?
How did you repair this? Can you post before and after pictures?
Re: best glue?
i ended up using something called epoxy glue i believe
i don’t think the fumes are good for the crabs so i took plastic wrap and used it as a temporary cover to the tank and i wove it under the brace and kinda taped it so it was out out the way and sealed
then i took double sided tape to get the end of the brace to stick where it should have and i prepared to epoxy
then i just took a popsicle stick and put epoxy in the cracks
it says it needed 24 hours to dry
it smelt pretty bad so i left a window open a bit
the next morning the smell was gone and the day after that i put my new lid on
i can post a pic later if u want but there isn’t much to see lol and i don’t have a before pic but you will be able to see right where it was broken
i don’t think the fumes are good for the crabs so i took plastic wrap and used it as a temporary cover to the tank and i wove it under the brace and kinda taped it so it was out out the way and sealed
then i took double sided tape to get the end of the brace to stick where it should have and i prepared to epoxy
then i just took a popsicle stick and put epoxy in the cracks
it says it needed 24 hours to dry
it smelt pretty bad so i left a window open a bit
the next morning the smell was gone and the day after that i put my new lid on
i can post a pic later if u want but there isn’t much to see lol and i don’t have a before pic but you will be able to see right where it was broken
Re: best glue?

the whole part of the center brace there where you see the clear stuff was completely snapped
the other stuff you see is the tape
(forget the previous post where i said it was double sided i forgot i just used regular tape)
i folded it hot dog style and put half on the tank wall and the other folded half went underneath the brace
the glue works great it just dries in a big clump so as long as you don’t mind seeing it it works perfect
Sent from my iPhone using Tapatalk