Is this a good layout for PVC pieces for a false bottom?

For presenting do-it-yourself projects for your crabitat and for discussing and displaying custom built crabitats. Also for questions and reviews on equipment and products. *Stores and their reviews now have their own section in Classifieds*
Post Reply

Topic author
LoveMyCrabbos
Posts: 4
Joined: Thu Sep 03, 2020 1:48 am
Location: Seattle, WA, USA

Is this a good layout for PVC pieces for a false bottom?

Post by LoveMyCrabbos » Fri Sep 04, 2020 10:58 pm

-Tank measurements: 48" long x 18" wide
-Each PVC cap is 3" in diameter
-The gap in the lower right corner is where the drainage pipe will go

Any feedback would be very much appreciated :)

Also this is my first post, hi! ImageImage

Sent from my Pixel 3a using Tapatalk

🦀♥️ I love my 3 purple pinchers: Colin, Tim, and Freddie ♥️🦀

User avatar

aussieJJDude
Administrator
Administrator
Posts: 5006
Joined: Fri Feb 24, 2012 8:12 pm
Location: Melbourne, Australia
Contact:

Re: Is this a good layout for PVC pieces for a false bottom?

Post by aussieJJDude » Sun Sep 06, 2020 11:08 pm

Id pop a little notch so it stops the buildup of water underneath every cap. I think its on the right track.

Sent from my SM-G935F using Tapatalk

|| Avid Aquarist Addict (2007) || Crazy Crabbing Connoisseur (2012) || Amateur Aroid Admirer (2014) ||

"She’s there, she’s upright, and she’s wigged" ~ Trixie
Infrequently on due to studies


Topic author
LoveMyCrabbos
Posts: 4
Joined: Thu Sep 03, 2020 1:48 am
Location: Seattle, WA, USA

Re: Is this a good layout for PVC pieces for a false bottom?

Post by LoveMyCrabbos » Sun Sep 06, 2020 11:23 pm

Thanks man, I just notched all the bottoms with a dremel today! Appreciate it.

Sent from my Pixel 3a using Tapatalk

🦀♥️ I love my 3 purple pinchers: Colin, Tim, and Freddie ♥️🦀


Astone
Posts: 29
Joined: Mon May 25, 2020 9:40 pm
Location: NY

Re: Is this a good layout for PVC pieces for a false bottom?

Post by Astone » Mon Sep 07, 2020 2:47 pm

What is the purpose of the false bottom for the crabs? I have seen someone else do this also and I'm just curious

Sent from my moto g(6) (XT1925DL) using Tapatalk



Topic author
LoveMyCrabbos
Posts: 4
Joined: Thu Sep 03, 2020 1:48 am
Location: Seattle, WA, USA

Re: Is this a good layout for PVC pieces for a false bottom?

Post by LoveMyCrabbos » Mon Sep 07, 2020 3:24 pm

For drainage, to prevent lethal flooding, and hopefully to prevent dangerous bacterial blooms from standing water!

Sent from my Pixel 3a using Tapatalk

🦀♥️ I love my 3 purple pinchers: Colin, Tim, and Freddie ♥️🦀


Astone
Posts: 29
Joined: Mon May 25, 2020 9:40 pm
Location: NY

Re: Is this a good layout for PVC pieces for a false bottom?

Post by Astone » Mon Sep 07, 2020 3:25 pm

Oh makes sense thank you!

Sent from my moto g(6) (XT1925DL) using Tapatalk


User avatar

Hermies Conrad
Posts: 14
Joined: Tue Aug 11, 2020 8:57 pm
Location: Texas

Re: Is this a good layout for PVC pieces for a false bottom?

Post by Hermies Conrad » Mon Sep 07, 2020 7:30 pm

Curious- do you also put a plug in the bottom in order to drain the water?


Topic author
LoveMyCrabbos
Posts: 4
Joined: Thu Sep 03, 2020 1:48 am
Location: Seattle, WA, USA

Re: Is this a good layout for PVC pieces for a false bottom?

Post by LoveMyCrabbos » Mon Sep 07, 2020 8:17 pm

I haven't, but I'm sure some people do. I have a side piece of PVC that comes all the way up to the top of the tank so that I can drain water through there if need be!Image

Sent from my Pixel 3a using Tapatalk

🦀♥️ I love my 3 purple pinchers: Colin, Tim, and Freddie ♥️🦀

User avatar

Enson
Posts: 59
Joined: Wed Jul 29, 2020 10:06 pm
Location: West Virginia

Re: Is this a good layout for PVC pieces for a false bottom?

Post by Enson » Tue Sep 08, 2020 10:46 am

If you haven't already, some piccolo holes in the vertical pvc pipe through the substrate height will help catch water and drain it to the bottom quicker so it can be then sucked out.

I would recommend a load test (125% of your expected weight) across the caps before adding substrate. The reason being, glass and stress concentrations don't mix well. Using solid caps with the flat down is definitely better than the ones I've seen with pvc pipe laying flat (cylinder edges are very bad stress concentrations).

Just some thoughts! Looks good so far.

Sent from my moto g power using Tapatalk


User avatar

wodesorel
Tech Support
Tech Support
Posts: 10587
Joined: Thu Oct 01, 2009 8:49 am
Location: Leetonia, Ohio
Contact:

Re: Is this a good layout for PVC pieces for a false bottom?

Post by wodesorel » Fri Sep 11, 2020 3:56 am

Keep in mind that substrate can still become oversaturated with bacterial blooms happening in the middle of the mass, even when suspended with a false bottom. It's a tool, but it is not a cure!
Want to see all my crazy pets? @waywardwaifs on Instagram

Post Reply