Ultratherm UTH insulating questions

Older topics that are in the process of being sorted and moved into the appropriate Archived sections below.
User avatar

Topic author
alhj
Posts: 7
Joined: Sat Jun 25, 2016 6:02 pm

Ultratherm UTH insulating questions

Post by alhj » Sat Oct 22, 2016 12:33 pm

I replaced my does-absolutely-no-heating ZooMed UTH and bought a nice Ultratherm UTH. It's the full length of my 10gallon tank. So far, it is keeping my tank 5 degrees above room temperature, consistently. This is pretty good most of the time, but now that winter is approaching 5 degrees above room temperature is only going to keep the tank at 73. Granted, it's a bit warmer in the back up against the heater, but still. I'd like the temp overall to be at least 75. I know I've seen pictures of people insulating the heater. I currently have 2 layers of corrugated cardboard with foil on the front covering the back of my tank. But I think I can probably do better.

Before I buy yet more crab supplies, I thought I'd get advice from you all that we know works. So, how do you insulate your Ultratherm UTH to raise it's heating capabilities? Thanks.

User avatar

alela
Posts: 69
Joined: Wed Oct 12, 2016 10:31 am

Re: Ultratherm UTH insulating questions

Post by alela » Sat Oct 22, 2016 1:13 pm

I live in Arizona, so temperature is not a problem. I have seen others, though, insulate their tank with Reflectix! They cover the whole back, where the heater is at :)

Sent from my SM-G920V using Tapatalk

User avatar

MrTeacherDude
Posts: 283
Joined: Thu Aug 04, 2016 4:04 pm

Re: Ultratherm UTH insulating questions

Post by MrTeacherDude » Sat Oct 22, 2016 3:47 pm

Without Reflectix, my tank with just my Ultratherm UTH was hovering around 75-76°. When my Reflectix arrived from Amazon, I covered the entire back and the sides above the sub. My temp is constantly at 82-86° now.


Sent from my iPhone using Tapatalk

User avatar

MrTeacherDude
Posts: 283
Joined: Thu Aug 04, 2016 4:04 pm

Ultratherm UTH insulating questions

Post by MrTeacherDude » Sat Oct 22, 2016 3:49 pm

Image

Image

Reflectix inside and outside my tank.

Sent from my iPhone using Tapatalk

User avatar

Kermie16
Posts: 2266
Joined: Mon Apr 11, 2016 7:13 am

Re: Ultratherm UTH insulating questions

Post by Kermie16 » Sat Oct 22, 2016 9:04 pm

Ditto for us too!! We have reflectix covering the entire backside of our tat insulating our Ultratherm and on both sides of the tat as well to keep the temp between 81-85 degrees. When our power went out with Hurricane Matthew I covered the entire tank with reflectix:)


Sent from my iPhone using Tapatalk

User avatar

littletechcrab
Posts: 152
Joined: Wed Jul 22, 2015 6:11 am
Location: Glenshaw, PA

Re: Ultratherm UTH insulating questions

Post by littletechcrab » Sun Oct 23, 2016 9:15 am

Same here I use Reflections. It insulates very well. Living in Pennsylvania it can get pretty cold here but my tank is usually never lower than 80 degrees.

Sent from my LG-H901 using Tapatalk

User avatar

littletechcrab
Posts: 152
Joined: Wed Jul 22, 2015 6:11 am
Location: Glenshaw, PA

Re: Ultratherm UTH insulating questions

Post by littletechcrab » Tue Oct 25, 2016 3:55 am

littletechcrab wrote:Same here I use Reflections. It insulates very well. Living in Pennsylvania it can get pretty cold here but my tank is usually never lower than 80 degrees.

Sent from my LG-H901 using Tapatalk
That should read Reflextix darn auto correct

Sent from my LG-H901 using Tapatalk

User avatar

PinchersAndShells
Posts: 1343
Joined: Tue Aug 16, 2016 12:02 pm
Location: Ohio
Contact:

Re: Ultratherm UTH insulating questions

Post by PinchersAndShells » Tue Oct 25, 2016 7:15 am

I couldn't get ahold of Reflectix because it's a bit pricey, I currently use a layer of aluminum foil, cardboard, and another layer of aluminum foil as insulation. This covers the entire back of the tank.
4 PPs + 1 E = Dusty, Momo, Seasalt, & Elvis
Captive Bred PP = Randy
75 Gallon Crabitat | Crabbing Since 8.11.2015
https://www.instagram.com/pinchersandshells/

User avatar

Kermie16
Posts: 2266
Joined: Mon Apr 11, 2016 7:13 am

Re: Ultratherm UTH insulating questions

Post by Kermie16 » Tue Oct 25, 2016 9:01 am

That should work well!


Sent from my iPhone using Tapatalk

User avatar

curlysister
Administrator
Administrator
Posts: 4272
Joined: Sun Sep 05, 2010 3:54 pm
Location: Manitoba, Canada

Re: Ultratherm UTH insulating questions

Post by curlysister » Sun Nov 06, 2016 1:59 pm

I am in the process of upgrading to a larger tank, and am trying to figure out the heating. Is the Reflectix overtop of the UTH mounted on the side?
"If there are no dogs in Heaven, then when I die I want to go where they went." -Will Rogers

User avatar

littletechcrab
Posts: 152
Joined: Wed Jul 22, 2015 6:11 am
Location: Glenshaw, PA

Re: Ultratherm UTH insulating questions

Post by littletechcrab » Sun Nov 06, 2016 7:07 pm

Yes put the reflectix over the uth. I use clear packing tape to attach both the uth and the refectix and only on the edges of the uth away from the heating element part

Sent from my LG-V496 using Tapatalk

User avatar

MrTeacherDude
Posts: 283
Joined: Thu Aug 04, 2016 4:04 pm

Re: Ultratherm UTH insulating questions

Post by MrTeacherDude » Mon Nov 07, 2016 8:38 pm

curlysister wrote:I am in the process of upgrading to a larger tank, and am trying to figure out the heating. Is the Reflectix overtop of the UTH mounted on the side?
I have Reflectix over my UTH on the back as well as the rest of the back above the sub. I also have Reflectix on both sides of my tank (without UTH's) above the sub, to keep the sides insulated since my classroom stays very chilly.


Sent from my iPhone using Tapatalk

User avatar

bbcraft22
Posts: 145
Joined: Sun Aug 07, 2016 10:09 pm

Re: Ultratherm UTH insulating questions

Post by bbcraft22 » Tue Nov 08, 2016 9:35 am

Ive read the reviews and it sounds really good! I might ask my mom if I can get it bcause usually it is 75 degrees in my area.


Sent from my iPad using Tapatalk
"You have not lived today until you have done something for someone who can never repay you." -Jon Bunyan

User avatar

Visual
Posts: 354
Joined: Tue Nov 01, 2016 7:59 am
Location: Kentucky

Re: Ultratherm UTH insulating questions

Post by Visual » Tue Nov 08, 2016 12:04 pm

Woah I need to get me some of that. Have any of you guys experienced higher crab activity levels when the Temps in your tank stay higher??

Sent from my SAMSUNG-SGH-I337 using Tapatalk
Sometimes there's fire, sometimes there's rain
www.loverochambeau.com

User avatar

PinchersAndShells
Posts: 1343
Joined: Tue Aug 16, 2016 12:02 pm
Location: Ohio
Contact:

Re: Ultratherm UTH insulating questions

Post by PinchersAndShells » Tue Nov 08, 2016 12:05 pm

Visual wrote:Woah I need to get me some of that. Have any of you guys experienced higher crab activity levels when the Temps in your tank stay higher??

Sent from my SAMSUNG-SGH-I337 using Tapatalk
Yes, any lower than 80 degrees makes your crabs sluggish. Mid 80s is where most notice the highest amounts of activity.
4 PPs + 1 E = Dusty, Momo, Seasalt, & Elvis
Captive Bred PP = Randy
75 Gallon Crabitat | Crabbing Since 8.11.2015
https://www.instagram.com/pinchersandshells/

Locked