Surface moult

This forum is where you discuss issues relating to molting hermit crabs, including pre- and post-molting issues. If you are having a molting emergency please post in the Emergency Forum.
Post Reply

Topic author
Sky4379
Posts: 5
Joined: Sun Apr 11, 2021 4:56 pm

Surface moult

Post by Sky4379 » Sun Apr 11, 2021 5:03 pm

So about a month and a half ago I purchased two little hermit crabs from the pet store. At the start they were both very active and then one went underground for a while and I presumed he was moulting so I left him underground. Then two nights ago I woke up and he had come above ground and moulted in their little hut. Isolating him in the tank was not possible to I carefully moved him to a temporary tank with his exoskeleton which is where he is now. I have a feeling this weird behaviour is post pet store syndrome as I have the conditions right in the tank eg humidity is correct, I have a heat mat and the correct substrate (plays and and coco peat at about 6 inches) and the right food and water bowls. He has yet to eat his exoskeleton and I was wondering how long it would be until he ate it? Also will he bury himself again or stay on the surface and how long should I expect it to be before he’s back to normal. I also should not his tank was unintentionally jolted causing him to be knocked over and then I carefully put him back where he was, should I be concerned about this? Would something like that kill him? Be crab owner here so any advice is appreciated, Thankyou :)

User avatar

JoeHermits
Administrator
Administrator
Posts: 2115
Joined: Wed Apr 04, 2018 9:26 pm
Contact:

Re: Surface moult

Post by JoeHermits » Sun Apr 11, 2021 5:10 pm

He’ll eat the exoskeleton on his own time. Most of the time spent underground is just recovery time, so it may take a while.

As for the jostling, there’s a small window that lasts about a day or two immediately after a molt where they’re at their softest and most vulnerable. However, even if he was injured there’s not much you can do but monitor and wait.


Sent from my iPhone using Tapatalk

User avatar

Pumpkincrab
Posts: 578
Joined: Thu Oct 22, 2020 6:13 pm
Location: This Universe
Contact:

Re: Surface moult

Post by Pumpkincrab » Sun Apr 11, 2021 6:41 pm

What are you feeding them?
Hi! Feel free to check out TheGourmetCrab here: https://www.etsy.com/shop/TheGourmetCra ... ugg_market
Owner of 4 purple pincher hermit crabs in a 55g tank.


Topic author
Sky4379
Posts: 5
Joined: Sun Apr 11, 2021 4:56 pm

Re: Surface moult

Post by Sky4379 » Mon Apr 12, 2021 1:47 am

I feed him a pet store brand of food mixed with fruits and vegetables and sometimes chicken and pork

User avatar

Pumpkincrab
Posts: 578
Joined: Thu Oct 22, 2020 6:13 pm
Location: This Universe
Contact:

Re: Surface moult

Post by Pumpkincrab » Mon Apr 12, 2021 9:39 am

Sadly, hermit crab pellets have harmful preservatives and additives.
I would recommend you make your own mixes or buy them off of sites like Etsy.
A crab's diet should include: Protein, calcium, fruits, veggies, leaf litter, chitins, and fats. All of these help contribute to healthy molts and just a generally happy crab!
Hi! Feel free to check out TheGourmetCrab here: https://www.etsy.com/shop/TheGourmetCra ... ugg_market
Owner of 4 purple pincher hermit crabs in a 55g tank.


Topic author
Sky4379
Posts: 5
Joined: Sun Apr 11, 2021 4:56 pm

Re: Surface moult

Post by Sky4379 » Mon Apr 12, 2021 7:02 pm

The food from the pet store is not pellets it has things like dried shrimp seaweed oats and other things like that in it

User avatar

FJrocks003
Posts: 271
Joined: Sun Mar 01, 2020 8:03 am
Location: Baltimore, MD

Re: Surface moult

Post by FJrocks003 » Fri Apr 16, 2021 12:52 pm

Sky4379 wrote:
Mon Apr 12, 2021 7:02 pm
The food from the pet store is not pellets it has things like dried shrimp seaweed oats and other things like that in it
What brand is it? The most common one is zod-med/thrive, these have load of preservatives so I would use them if I were you.
Indigo, Fleck, Flame, Dilly, and our newest addition: Thunder
RIP: Bubbles (passed on Wednesday March 31, 2020)

Post Reply